SplashGuard Pool Paint: Vibrant Coating for Swimming Pools – Available in 1 to 20 Liters

CAIRCON Pool Coating is a high-quality paint designed for swimming pools.

In addition to its excellent water resistance, this coating is also scratch and impact resistant and is resistant to chlorine. As the coating does not absorb dirt, it is easy to clean.

This coating is suitable for:

• Swimming pools
• Fountain basins
• Fountains
• Fish tanks
• Fish ponds
• Both indoor and outdoor pools

Preparation:

1. Concrete or Cement Plaster: The surface must be well-cured before painting, meaning it should be at least 6 weeks old.
2. Surface Condition: The substrate must be dry, dust-free, and grease-free.
3. Old Coatings: Old coatings must be thoroughly sanded.
4. Pre-Treatment: The substrate should first be prepared with a special pre-cleaner.
5. Water Filling: Water can be added no sooner than 14 days after applying the final coat.

IMPORTANT: The chlorine and salt content of the water must not exceed 0.3-0.4%!

Application:

• 🟠Application Methods: Pool paint can be applied by brushing or rolling.
• 🟠For an Even Appearance: Always work "wet-on-wet" to ensure a uniform finish.
• 🟠Rolling Technique: Apply the material evenly (adhere to the recommended material consumption) and roll crosswise.
• 🟠Recommended Coats: Two coats are recommended.
• 🟠Application Temperature: Between +15°C and +25°C.

Recommended Additional Products:

• 🟠Pre-Cleaner Concrete Paint
• 🟠2K Sealant Slurry Pool
• 🟠2K Pool Paint
• 🟠Stone Carpet Floor Coating
• 🟠Deep Primer Primer
• 🟠2K Tile Paint
• 🟠Nail Sole
• 🟠CAIRCON Floor Roller
• 🟠Paint Spraying System

Benefits:

• 🟠Water-Resistant
• 🟠Non-Toxic Pigments
• 🟠Free from Harmful Solvent Vapors
• 🟠Scratch and Impact-Resistant
• 🟠Abrasion-Resistant
• 🟠Easy to Apply
• 🟠Quick Drying
• 🟠Repaintable after approximately 4 hours
• 🟠Suitable for Indoor and Outdoor Use