2K Epoxy Pool Paint for Concrete, Tiles and Cement

2K coating for pools and water features

CAIRCON epoxy pool paint is a two-component epoxy resin coating for swimming pools, concrete basins, tiled basins, fountains and other water installations. It is designed for mineral substrates such as cement, concrete, screed and tiles where the surface is exposed to water.

Use this paint for swimming pool renovation, recoating or new pool coatings when the substrate matches the product requirements. As an epoxy swimming pool paint, it provides a satin-gloss finish with water, chemical and mechanical resistance after full curing.

Important water condition

The coating resists chlorine, moisture, water-treatment chemicals, acids, salts and alkalis after full cure. The chlorine and salt content of the water should not exceed 0.3-0.4%.

Areas of use

✓ Swimming pools, concrete basins and tiled basins
✓ Fountains and water installations
✓ New coatings and renovations
✓ Cement, concrete, screed, tiles and mineral substrates under water exposure

Product properties

✓ 2K epoxy pool paint / pool coating
✓ Satin-gloss finish
✓ Water-resistant, chemically resistant and mechanically resistant
✓ Impact-resistant and abrasion-resistant
✓ High coverage, no chalking and no dripping
✓ Free from harmful solvents

Application

Apply with a short-pile roller. Two to three coats are recommended. Processing time is approx. 20-30 minutes at 20°C. Application temperature should be between +7°C and +30°C. Keep the chlorine and salt content of the water below 0.3-0.4%.

Technical data

✓ Product type: 2K epoxy resin pool paint / coating
✓ Base: Two-component epoxy resin
✓ Finish: Satin gloss
✓ Coverage: approx. 250 g/m² per coat
✓ Drying / recoating: recoatable after at least 12 hours; full cure after approx. 7 days
✓ Application: Short-pile roller