Thermo Wall Paint – White Climate Control Coating for Interiors, 5 - 10L

Modern aesthetics, living comfort and functional surface properties

Discover the CAIRCON Thermo Interior Coating – a modern interior wall paint featuring innovative coating technology for visually appealing surfaces. The special formulation may support the subjective thermal comfort in the room. Breathable and vapour-permeable – ideal for interior use and a pleasant indoor climate.

Note: Possible effects on room temperature or energy consumption depend on insulation, heating system, ventilation and substrate. No specific energy savings are guaranteed.

Note on thermal performance:

The thermal characteristics of our Thermo products are based on special ceramic and microscopic fillers which may influence the surface properties of the coating. The effect is based on physical principles such as reflection and modified heat radiation.

Individual results:

Possible effects on room temperature or energy consumption depend on many factors, in particular the building structure, insulation level, condition of the building, heating system, as well as individual heating and ventilation behaviour. No specific energy or heating cost savings are promised.

Legal notice:

This coating does not replace structural thermal insulation as required by applicable regulations (e.g. German Building Energy Act – GEG).

Application

The substrate must be dry, clean, sound and free of grease. Remove loose paint, wallpaper residues and any other contaminants. Clean the surface thoroughly and, if necessary, lightly sand it. For highly absorbent substrates, the use of a suitable primer is recommended.

Stir well before use. Suitable for application with roller, brush or airless spray equipment. First paint corners and edges, then apply evenly using crosswise strokes (wet-on-wet) to achieve an even finish and good coverage.

Technical Data

🟠 Application temperature: +10 °C to +30 °C

🟠 Recoatable: after sufficient drying (approx. 24 hours, depending on temperature and humidity)

🟠 Coverage: approx. 5–7 m²/L (guideline value depending on substrate)

🟠 Number of coats: at least 2 coats recommended

🟠 Water vapour diffusion resistance factor (µ): approx. 55

🟠 Density: 1.4–1.5 g/cm³

🟠 Dry film thickness: approx. 200–240 µm