Areas of use
ā Balconies, terraces, stairs, walkways and conservatories
ā Garages, basements, workshops and industrial halls
ā Concrete, cement, tiles, mineral substrates and wood
ā Indoor and outdoor high-traffic floor areas
Product properties
ā Water-based 2K epoxy floor coating
ā Coloured coating plus waterproofing / sealing effect
ā Satin-gloss finish
ā Weather-resistant, UV-resistant, abrasion-resistant and impact-resistant
ā Chemical-resistant and resistant to plasticizers
Application
Clean the surface thoroughly, especially on greasy or heavily soiled substrates. Use suitable pre-cleaning or etching preparation where needed, and prime with epoxy primer to optimise adhesion. Apply 2 coats. Optional colour chips or anti-slip glass beads can be scattered into the wet coating for added effect, and a clear epoxy resin sealant can be applied as an optional glossy protective layer.
Technical data
ā Product type: Water-based 2K epoxy floor coating
ā Base: Epoxy resin and hardener, mixing ratio 10:1
ā Finish: Satin gloss
ā Coverage: approx. 250 g/m² per coat,
ā Drying / recoating: recoatable after at least 12 hours; walkable after 24 hours; full chemical cure after 7-9 days
ā Application: 2 coats, ideally at +15°C to +25°C and 40-60% humidity