Bathtub Paint, Ready-to-Use Satin-Gloss 1K for Enamel & Ceramic

Refresh your bath without removing it

CAIRCON bath paint gives worn sanitary surfaces a fresh appearance without the work involved in removing and replacing them. Recoating an existing bath can save time, effort and replacement costs while visibly refreshing the bathroom.

The paint is suitable for enamel and ceramic surfaces, including bathtubs, washbasins and shower trays. It can also be used on smaller tiled areas indoors. This makes it a practical choice for bathroom renovation projects, including DIY work with careful surface preparation.

A smooth satin-gloss finish for bathroom surfaces

The coating produces an even surface with a satin-gloss sheen. Once fully cured, the finish is water-resistant and hard-wearing, making it suitable for indoor sanitary surfaces and damp rooms. Two thin coats are recommended for an even result.

Areas of use

✓ Enamel, ceramic and suitable sanitary ceramic surfaces indoors
✓ Bathtubs, shower trays and washbasins
✓ Smaller tiled areas
✓ Bathrooms and indoor damp rooms

Product properties

✓ Ready-to-use, single-component sanitary paint
✓ Solvent-based with a satin-gloss finish
✓ Smooth, even surface for renovation work
✓ Water-resistant and hard-wearing once fully cured

Application

Clean, descale and degrease the surface thoroughly. Remove all soap, silicone and grease residues, along with any loose or damaged old coating. The substrate must be sound, clean and dry. Lightly sand it with fine 240-320 grit sandpaper, remove the dust and mask fittings, silicone joints and adjacent areas.

Stir thoroughly before use. The paint is ready to use and must not be mixed with other products. Apply evenly with a paint roller or a soft paintbrush at +15 to +25 °C. Two thin coats are recommended; allow approx. 12 hours before recoating. Avoid direct sunlight, high humidity and strong draughts, and keep the work area as dust-free as possible. Work in a well-ventilated room and keep ignition sources away.

The coating is dust-dry after approx. 4 hours and fully cured after approx. 7-10 days. During curing, protect it from water, moisture and mechanical stress; do not use the bath or shower tray until curing is complete.

Care

Use only mild, pH-neutral cleaners. Do not use abrasive cleaners, scouring pads, aggressive or strongly alkaline products, or cleaners containing chlorine.

Technical data

✓ Product type: Bath and sanitary paint
✓ System: 1K, single-component and ready to use
✓ Base: Solvent-based
✓ Area of use: Interior sanitary surfaces and damp rooms
✓ Suitable substrates: Enamel, ceramic and sanitary ceramic
✓ Finish: Satin-gloss
✓ Colours: White, anthracite
✓ Coverage: approx. 10 m²/L per coat
✓ Recommended coats: 2 thin coats
✓ Application: Paint roller or soft paintbrush
✓ Application temperature: +15 to +25 °C
✓ Dust-dry: approx. 4 hours
✓ Recoatable: after approx. 12 hours
✓ Fully cured: after approx. 7-10 days

Drying times and coverage are approximate and depend on the substrate, tools and application conditions.