Matt Concrete Floor Paint, Water-Based 1K for Indoor Floors

Matt floor paint for cellars and practical workspaces

CAIRCON matt 1K floor paint is a water-based acrylic floor coating made with an acrylate dispersion. It gives suitable interior concrete and screed floors an even matt finish, making it useful for cellar renovations, hobby rooms, workshops and storage areas subject to normal use.

The floor paint can also be applied to suitable wooden substrates. Test the coating on OSB, chipboard and MDF before treating the whole surface to check suitability and adhesion.

A hard-wearing surface that is easy to maintain

The coating resists abrasion and most oils, while its easy-clean surface helps with everyday floor maintenance. Apply the concrete floor paint by brush, roller or a suitable spray gun. Two coats are recommended for the finished coating.

Areas of use

✓ Interior concrete, screed and suitable wooden substrates
✓ Cellars, hobby rooms, workshops and storage areas
✓ Test coating required on OSB, chipboard and MDF
✓ Not suitable for asphalt or certain chemically densified concrete floors

Product properties

✓ Ready-to-use, single-component acrylic floor coating
✓ Water-based with an even matt finish
✓ Abrasion-resistant and resistant to most oils
✓ Easy-to-clean floor surface

Application

The substrate must be sound, clean, dry and free from grease, oil, dust and loose material. Remove contamination, sand and repair the surface where necessary, and apply a suitable primer as required. Before coating the full area, prepare a test patch and check the colour once dry.

Stir thoroughly before use. Paint the edges with a brush, then coat the floor evenly with a floor roller. A suitable spray gun may also be used. Two coats are recommended, with the second coat applied after approx. 24 hours. For increased slip resistance, a suitable anti-slip additive can be scattered into the final coat.

The coating is ready for full use after approx. 7-9 days. Protect it from water contact and heavy use until fully cured. For garages with vehicle traffic and heavily trafficked floors, a suitable 2K epoxy floor coating is recommended.

Technical data

✓ Product type: Single-component floor paint / floor coating
✓ Base: Water-based acrylate dispersion
✓ Finish: Matt
✓ Area of use: Interior
✓ Suitable substrates: Concrete, screed and suitable wooden substrates
✓ Coverage: approx. 5-8 m²/L per coat
✓ Recommended coats: 2
✓ Application temperature: +10 to +25 °C
✓ Dry to handle: approx. 6 hours
✓ Second coat: after approx. 24 hours
✓ Ready for full use: after approx. 7-9 days
✓ Thinning: Ready to use; optionally add max. 10% water
✓ Application: Brush, roller or suitable spray gun
✓ Tool cleaning: Water

All technical values are approximate. Drying times apply at 20-25 °C and 40-60% relative humidity.