Skip to content
#2.5L

Parquet & Wood Lacquer: Versatile Floorboard & Staircase Finish – Clear Gloss or Matt Options, 1 to 20 Liters

by CAIRCON
€22,90 - €179,90
€22,90
€22,90 - €179,90
€22,90
750.0ml | €30,53 / l
Finish: Satin Gloss
Size: 750ml
Farbe: Transparent

🟠 CAIRCON stairs and parquet varnish for indoor wood, such as furniture, doors, and wood paneling. It is also ideal as a colorless, abrasion-resistant coating for surfaces that have already been coated.
🟠 Our wood clear coat is hard-wearing, quick-drying, low-odor, impact and scratch-resistant, and it has very good flow. Made in Germany.
🟠 For painting all common indoor wood surfaces. It is easy to apply with a brush, roller, or airless sprayer.
🟠 CAIRCON floorboard varnish is ideally suited for living room furniture, children's furniture, parquet, wooden floors, wooden floorboards, as well as for stairs and the entire interior design.
🟠 Very economical, approximately 5 sqm per liter (depending on the surface).

Open Instructions

Advantages of Floor Lacquer:

  1. Low-Maintenance Surface
    A wood floor sealed with lacquer is very easy to maintain. The lacquered finish creates a very smooth surface that is easy to wipe, sweep, or vacuum.
  2. Easy to Apply
    The lacquer can be efficiently applied using a roller on a telescopic pole.
  3. Abrasion-Resistant
    A lacquered floor is highly resistant to abrasion and generally more durable than oil-treated floors.
  4. Retains Wood Color
    Unlike wood oils, lacquer does not penetrate the wood structure but forms a protective seal. This helps to preserve the wood’s original color.

Application Areas:

🟠 Suitable for indoor use, including wooden floors and staircases
🟠 For all untreated wooden surfaces

As wood and floor coating:
🟠 Parquet
🟠 Wooden floors
🟠 Cork floors
🟠 Wooden planks
🟠 Stairs
🟠 Panels

Wood Painting: STEP BY STEP

The necessary steps to achieve a clean result when painting:

  1. Remove unevenness
  2. Clean thoroughly with a special pre-cleaner
  3. The surface must be dry, clean, load-bearing, and free from salts, grease, and wax
  4. Sand old coatings
  5. Remove loose paint residues
  6. Paint - 2 coats recommended (several coats may be needed depending on the product)

Application and Drying:

The product can be applied in its delivered form using:
🟠 Brush
🟠 Roller
🟠 Airless spray device

Drying times:
🟠 Dust dry: after approximately 2 hours
🟠 Repaintable: after approximately 12 hours
🟠 Fully load-bearing: after approximately 1 week

WARNING: Do not apply or dry at temperatures below +5°C!