Hammer Finish Metal Paint 4-in-1 with Rust Protection Outdoors

Decorative rust protection for metal

This hammer finish paint is made for protective and decorative coatings on metal. It is suitable for fences, mailboxes, doors, railings, grilles, garden furniture, toolboxes, lamps, bicycles, trellises and metal fences.

Active rust protection pigments seal existing rust, while high-quality resins form a moisture-protective layer and help prevent renewed rust formation. The result is a protective metal paint that works as primer, rust protection, intermediate coat and topcoat.

Hammer effect finish and application

The hammer effect paint helps conceal small surface irregularities and creates a decorative industrial-style finish. The substrate must be stable, clean, grease-free and completely dry.

Areas of use

✓ Bare or rusty metal substrates
✓ Iron, steel, zinc, aluminium and metal
✓ Fences, railings, grilles, doors, mailboxes, toolboxes and garden furniture
✓ Indoor and outdoor use

Product properties

✓ Solvent-based 4-in-1 metal protection paint
✓ Rust protection, primer, intermediate coat and topcoat
✓ Decorative hammered finish
✓ Weather-resistant, durable and strongly covering
✓ Resistant to oil and many chemicals

Application

Stir well before use. Apply evenly and thinly by brush or roller. After approx. 1 minute, apply one or two further thin coats and then do not rework the finish. Work wet-on-wet and test a small area before coating larger surfaces.

Technical data

✓ Product type: hammer finish metal paint / protective metal paint
✓ Base: solvent-based
✓ Finish: hammered finish
✓ Coverage: approx. 6-8 m²/L per coat
✓ Application temperature: approx. +10 °C to +25 °C
✓ Drying: dust-dry after approx. 1-2 hours, recoatable after approx. 8 hours
✓ Full cure: approx. 21 days
✓ Application: brush or roller