Natural Stone Oil for Stone Impregnation, Care & Wet-Look Finish

Care oil for absorbent stone surfaces

This natural stone oil is a solvent-free stone maintenance oil made from natural raw materials. It is designed for natural stone care and natural stone impregnation on absorbent and porous stone surfaces.

For indoor and outdoor natural stone

Use it on granite, marble, slate, clinker, open-pored concrete stone, garden paths, terraces and indoor or outdoor stone surfaces. The oil penetrates the pores, enhances the natural colour and gives the surface a maintained wet-look appearance.

Colour-enhancing impregnation with protective effect

After drying, the natural stone impregnation oil forms a clear protective film that repels dirt and water while remaining vapour-permeable. Applied correctly, it helps protect stone without creating a visible surface layer.

Areas of use

✓ Absorbent, open-pored natural and artificial stones
✓ Granite, marble, slate, clinker and open-pored concrete stone
✓ Garden paths, terraces and stone surfaces indoors and outdoors

Product properties

✓ Solvent-free and made from natural raw materials
✓ Colour-enhancing with wet-look effect
✓ Dirt- and water-repellent protective film
✓ Vapour-permeable
✓ Protection against weather, rain, sun exposure, UV rays and environmental influences

Application

Apply the stone oil thinly with a brush or cloth to untreated, clean and grease-free stone surfaces. Do not apply below +10 °C. A test coat is recommended. Remove excess oil after approx. 30 minutes so the product penetrates the stone and does not form a visible layer.

Technical data

✓ Product type: natural stone oil / stone care oil
✓ Base: solvent-free, natural raw materials
✓ Suitable substrates: absorbent, open-pored natural and artificial stones
✓ Area of use: indoor and outdoor
✓ Application temperature: from +10 °C
✓ Coverage: up to approx. 10 m²/L, depending on substrate
✓ Application: thin coat by brush or cloth
✓ Aftercare: remove excess oil after approx. 30 minutes