Thermo Interior Wall Paint Reflective for Walls and Ceilings

White wall and ceiling paint with functional surface properties

This thermo wall paint is an interior paint for rooms where walls and ceilings need a bright, clean and functional coating. It may support subjective indoor thermal comfort through optimized surface properties.

The white interior wall paint is suitable for bedrooms, living rooms, kitchens, bathrooms and other interior rooms. On prepared plaster, concrete and drywall, it creates an even, breathable surface.

Reflective surface for indoor comfort

Under suitable conditions, the coating may help reduce surface moisture formation. Results depend on indoor climate, ventilation, insulation, heating system and substrate. The paint does not replace structural insulation and does not promise energy or heating-cost savings.

Areas of use

✓ Interior walls and ceilings
✓ Plaster, concrete and drywall with suitable preparation
✓ Bedrooms, living rooms, kitchens, bathrooms and interior renovation

Product properties

✓ White thermo interior paint with reflective properties
✓ Special ceramic or microscopic fillers
✓ Breathable, vapour-permeable, water-based and low-odour
✓ May support perceived room comfort and surface moisture control

Application

The substrate must be dry, clean, sound and free of grease. Remove loose paint and wallpaper residues, clean the surface and sand if needed. Stir well and apply by roller, brush or airless spray equipment. At least two coats are recommended.

Technical data

✓ Product type: thermo interior paint / reflective interior wall paint
✓ Colour: white
✓ Suitable substrates: plaster, concrete and drywall
✓ Use: interior
✓ Coverage: approx. 5-7 m²/L
✓ Application temperature: +10 °C to +30 °C
✓ Recoating: after approx. 24 hours
✓ Coats: at least two coats recommended
✓ Water vapour diffusion resistance factor: 55
✓ Density: 1.4-1.5 g/cm³
✓ Dry film thickness: approx. 200-240 µm
✓ Application: roller, brush or airless spray equipment