Deep Primer for Absorbent Mineral Surfaces Indoors and Outdoors

Primer for absorbent mineral substrates

This universal primer is a water-based deep primer for substrates that may absorb paint or coatings unevenly. It penetrates absorbent surfaces, strengthens the substrate and supports even absorption.

The adhesion primer is suitable for concrete, screed, cement, gypsum, plaster, masonry and plasterboard. It helps reduce coating seepage, uneven absorption, lap marks and staining on porous surfaces.

Application before follow-up work

The mineral-surface primer is low-odour, solvent-free and ready to use before wall paint, dispersion paint, plaster or filler work.

Areas of use

✓ Concrete primer for absorbent concrete, screed, cement and gypsum
✓ Plaster bonding primer, masonry bonding primer and wall preparation
✓ Indoor and outdoor use
✓ Preparation before paint, plaster, filler and later coatings

Product properties

✓ Ready-to-use universal primer, no mixing required
✓ Water-based synthetic dispersion
✓ Solvent-free and low-odour
✓ Deep-penetrating, consolidating and dust-binding
✓ Reduces absorbency and improves the base for follow-up coats

Application

The substrate must be clean, dry, stable and free from loose material. Apply evenly by roller, brush or spraying. Use from approx. 6 °C. Clean tools after use.

Technical data

✓ Product type: deep primer / universal primer / adhesion primer
✓ Base: water-based synthetic dispersion
✓ Substrates: concrete, screed, cement, gypsum, plaster, masonry, plasterboard
✓ Application temperature: from approx. 6 °C
✓ Drying / recoating: after approx. 10-12 hours, depending on substrate and climate
✓ Application: roller, brush or spraying